Jun 27, 2018 Leave a message

TV Monitoring Control Section

The control part is the "heart" and "brain" of the whole system, which is the command center to realize the function of the whole system. The control section consists mainly of the general console (some systems also have a secondary console). Total console main features are: the video signal amplification and distribution, the image signal correction and compensation, image signal switching, image signal (or sound signals) records, video camera and its accessories (such as lens, yuntai, shields, etc.) control (remote control), and so on. Among the above parts, the three parts that have the greatest influence on image quality are amplification and distribution, correction and compensation, and image signal switching. In some cases, when the camera is close to the control center or does not have high requirements for the whole system index, there is often no correction and compensation part in the total control platform. However, for some distance, or because of transmission mode requirements, correction and compensation are very important. Because after image signal transmission, often the amplitude frequency characteristics (due to the different frequency components arrived at total console, attenuation is different, thus causing the size of the image signals of different frequency components are different, this is called the amplitude frequency characteristics), phase frequency characteristics (images of different frequency signal through the transmission part of the produce phase shift is different, this is called phase frequency characteristics) can't absolutely meet the requirements of indicators and so on the console to transmit to the image signal amplitude frequency and phase frequency calibration and compensation. The corrected and compensated image signal is then allocated and amplified into the video switching section and sent to the monitor. Another important aspect of the overall console is the ability to remotely control the camera, lens, cloud cover, etc., to complete a comprehensive, detailed monitoring or tracking of the monitored site. The video recorder installed on the main control desk can record the images of the monitored places at any time, so that they can be checked later or serve as an important basis. High until now, some of the console is equipped with one or two "long time-lapse video recorder", this video is available with a plate of 60 minutes long record of the video image signal for a few days, so you can image is very important for some place to be monitored continuously records, without having to use a lot of video. There is also a "multi-screen splitter" on the main console, such as four, nine, 16 and so on. By BSV LCD splicing technology, that is to say, can on a monitor at the same time shows four, nine, from 16 cameras are monitoring sites, using a conventional video or long time delay video recorder for recording. The above functions should be set according to the requirements of the system, not necessarily all.


Send Inquiry

whatsapp

skype

E-mail

Inquiry