The camera part is the front part of the TV monitoring system and the eyes of the whole system. It is located in a certain position of the monitored place, so that its view field Angle can cover the entire monitored parts. Sometimes, be monitored place area is larger, in order to save the number of cameras used, simplify the transmission system and control and display system, equipped with electric on camera zoom (remote control) (times), so that the camera can observe farther, more clearly; Sometimes the camera installed on the electric yuntai, through the control console, can make the yuntai drives the camera for the horizontal and vertical direction of rotation, so that the Angle of the camera can cover, larger. In short, the camera ACTS like the eyes of the whole system, turning what it monitors into an image signal and transmitting it to the monitor in the control center. Part because of the camera is the most front end system, and the monitored place is by it into image signal transmitted to the control center monitor, so from the whole system, camera part is the system of the original signal. Therefore, the quality of the camera part and the quality of the image signal it produces will affect the quality of the whole system. In terms of system noise calculation theory, the influence of system noise is one of the biggest factors in the system the first level of output (here is the camera image signal output) signal SNR situation. Therefore, it is essential to carefully select and handle the camera part. If the camera output image signal after transmission parts and control to the monitor, then to monitor the image signal on the signal-to-noise ratio will fall, this is due to the transmission and control part of the circuit, amplifier, switches, etc. And because of the noise is introduced.
Jun 25, 2018
Leave a message
Television Surveillance Camera
Previous
TV Monitoring Transmission PartSend Inquiry





