Jun 12, 2018 Leave a message

Several Methods For Controlling Die Temperature By Die Temperature Machine

    he control of the temperature in the mold is not uniform, and it is also related to the time point in the injection cycle. After injection, the temperature of the cavity rises to the highest, when the hot melt touches the cold wall of the cavity, and the temperature drops to a minimum when the part is removed. The function of the die temperature machine is to prevent the temperature difference from fluctuating up and down in the production process or gap.
    Let's look at three ways to control the temperature of the mold.
    Control the fluid temperature of the die temperature machine. This is the most commonly used method, and the control accuracy can meet most of the requirements. Using this control method, the temperature shown in the controller is not consistent with the mold temperature; The temperature of the mould fluctuates considerably.

    Direct control of mold temperature. The method is to install the temperature sensor inside the mold, which will be adopted when the temperature control accuracy of the mold is high. The temperature set by the controller is the same as that of the mold. In general, the mold temperature is more stable than the fluid temperature control, and the repeatability in the production process control is better.
    Joint control. Joint control is a combination of the above two methods. It can control the temperature of the fluid and the mold at the same time. In joint control, the position of the temperature sensor in the mold is extremely important. When placing the temperature sensor, the shape, structure and cooling channel must be considered. In addition, temperature sensors should be placed where the quality of the injection molding parts is determined. The thermostat can also be automatically controlled.

Send Inquiry

whatsapp

skype

E-mail

Inquiry