Jun 29, 2018 Leave a message

TV Monitoring Equipment Requirements

There is always a distance monitoring and control center, from the scene of the monitoring need to image signal transmission image signal to the control center, at the same time from the control center of control signals are sent to the scene, so the transmission system consists of a video signal and control signal transmission.


Video signal transmission


Video baseband signals are generally transmitted by coaxial cable, TV signals can also be transmitted by optical cable and balanced cable pairs are transmitted by telephone cable. Because the cable has shielding effect on the external electrostatic field and electromagnetic wave, it can reduce crosstalk and transmission loss. However, when the cable is used as a long distance transmission medium, the effect on the earth unbalanced low-frequency ground current will occur, and sometimes there will be high-frequency interference. The signal transmission bandwidth is 50Hz ~ 4MHz. When the transmission distance is less than 200m, the coaxial cable is used to transmit the signal. When the transmission distance is greater than 200m, the cable attenuation is large. In order to transmit signals of different frequencies in the entire bandwidth, the cable compensation amplifier must be used. In some cases, when wiring is very difficult, wireless transmission such as microwave directional transmission may be used, but it requires the approval of the radio management committee to occupy frequency resources. 


Send Inquiry

whatsapp

skype

E-mail

Inquiry