The vacuum freeze dryer is different from the air freeze dryer. This is two different machines!
01
Air freezing dryer
Alias: refrigerated air dryer, air compressor refrigerated dryer, compressed air dryer, etc.
The refrigerated air dryer has become the main air drying and purification equipment at present, and is widely used in various types of pneumatic equipment, pneumatic tools, spray coating, food packaging, textile, chemical and other industries in industrial production.
Principle: Moist, high-temperature compressed air flows into the pre-cooler (for high-temperature type) to dissipate heat and then flows into the heat exchanger to exchange heat with the cold air discharged from the evaporator, reducing the temperature of the compressed air entering the evaporator.
The refrigerated compressed air dryer cools down by cooling, and the water vapor in the compressed air condenses into liquid droplets, so as to achieve the purpose of reducing the moisture content. The condensed droplets are discharged from the machine through the automatic drainage system. As long as the ambient temperature of the downstream pipeline of the dryer outlet is not lower than the dew point temperature of the evaporator outlet, there will be no secondary condensation.
General workflow:
Air process-compressed air enters the pre-cooling cooler from the air inlet for preliminary cooling, flows into the refrigeration system evaporator, and is further cooled by the refrigeration system. The cooled compressed air passes through the air-water separator, and the condensed water is discharged by the automatic drain and dried. The cooled compressed air returns to the heat exchanger for reheating, and leaves the refrigerated dryer through the air outlet.
Refrigerant process-the refrigerant is compressed by the refrigeration compressor into a high-temperature and high-pressure liquid state. The liquid refrigerant in the high-temperature and high-pressure state is cooled by a condenser (air-cooled or water-cooled) and then becomes a medium-temperature and high-pressure refrigerant, and passes through a dry filter to remove impurities After filtering, the refrigerant becomes a low-temperature and low-pressure gas-liquid mixed state through the action of the capillary tube, and finally enters the evaporator and exchanges heat with the hot compressed air, completes the refrigeration work, and returns to the refrigeration compressor for cycle work.
02
Vacuum freeze dryer
Alias: freeze dryer, freeze dryer, freeze dryer
Small freeze dryer
After starting the machine, put the material into the freeze-drying room for freezing. The freezing process of the material, on the one hand, is the vacuum system vacuuming to take away some of the water; on the other hand, the water in some molecules is discharged to the material when the material is frozen After the surface freezes and reaches the freezing requirement, the material is heated and dried by the heating system, and the moisture contained in the material is taken to the freezing trap box to freeze through the vacuum, and the material is freeze-dried.
Freeze drying refers to the process of removing water or other solvents from frozen biological products by sublimation. Sublimation refers to the process by which solvents, such as water, like dry ice, do not go through a liquid state, but change from a solid state to a gas state. The product obtained by freeze-drying is called a lyophilizer, and this process is called lyophilizer.
General process flow:
Pre-freezing stage: first freeze the moisture in the material into ice, so that the dried material has the same shape as before. The pre-freezing temperature must be lower than the eutectic point temperature of the material.





