The basic structure of centrifugal pump is composed of eight parts: impeller, pump body, pump cover, water baffle, pump shaft, bearing, sealing ring, packing box, and axial force balancing device.
1. The impeller is the core part of the centrifugal pump.
2. The pump body is also called pump shell, which is the main part of the pump. It plays a supporting and fixing role and is connected with the bracket of mounting bearing.
3. The function of the pump shaft is to connect the coupling with the motor to transfer the torque of the motor to the impeller, so it is the main part to transfer the mechanical energy
4. Sealing ring is also called leak reducing ring.
5. The stuffing box is mainly made of packing, which prevents the flow of water in the pump from going out and the air from going into the pump. Always keep the vacuum inside the pump! When the pump shaft and packing heat is generated by the water seal pipe into the water seal ring to cool the packing!
6, the axial force balance device, in the process of centrifugal pump operation, because the liquid is in low pressure into the impeller, and under the high pressure flow, the impeller pressure on both sides, the pointing in the direction the entrance of the axial thrust, will cause the rotor axial channeling, wear and vibration of the axial thrust bearing, and therefore should be set in order to balance the axial force.





