Whether the name, model number, main performance and quantity of lubricating oil conform to the requirements of technical documents;
Whether the lubrication system, seal system and cooling system of the bearing are in good condition, and whether the oil way and water way of the bearing are unimpeded;
The rotor of the disk pump rotates 1 ~ 2, check whether the rotor has friction or stuck;
In the vicinity of the coupling or the belt protective device, whether there are obstacles to the rotation of the debris;
Whether the foundation bolts of pump, bearing seat and motor are loose;
The valve or ancillary device of the pump working system shall be in the position of least load when the pump is running, and the outlet regulating valve shall be closed;
Point the pump to see if its impeller steering is consistent with the design steering. If it is not consistent, it must stop the impeller after adjusting the motor wiring before starting.





