The basic composition of the cooling system of the cold water machine:
Condenser: in the process of refrigeration, the condenser plays the role of heat output and condensing refrigerant. After the high pressure superheated steam discharged from the refrigerating compressor enters the condenser, the heat absorbed in the working process, including the heat absorbed from the evaporator and the refrigeration compressor and in the pipe, is transferred to the surrounding medium (water or air), and the refrigerant high pressure superheated steam condenses into a liquid. According to the difference of cooling medium and cooling mode, condenser can be divided into three types: water cooled condenser, air-cooled condenser and evaporative condenser.
Liquid receiver: after the condenser is installed on the condenser, it is directly connected with the drain pipe of the condenser. The refrigerant liquid of the condenser should flow freely into the reservoir, so that the cooling area of the condenser can be fully utilized. On the other hand, when the heat load of the evaporator changes, the demand for the refrigerant liquid also changes, then the liquid storage device plays the role of regulating and storing refrigerants. For small water chiller refrigeration systems, liquid refrigerants are not installed, but refrigerants are used to regulate and store refrigerants.
Drying filter: the water and dirt (oil, iron, copper chips) must be prevented in the cooling cycle of the cold water machine. The source of water is mainly the trace water content of the newly added refrigerants and lubricants, or the moisture brought by the time and space gas of the maintenance system. If the water in the system is not cleaned up, when the refrigerant passes through the throttle valve (thermal expansion valve or capillary), the water will solidify into ice because of the drop of pressure and temperature, which obstructs the channel and affects the normal operation of the refrigerating device. Therefore, a dry filter must be installed in the chiller cooling system.
Evaporator: evaporator depends on the evaporation of refrigerant liquid (in fact, boiling) to absorb heat from the cooling medium. Its function in the refrigeration system is to absorb heat (or output cooling capacity). In order to ensure that the evaporation process can be carried out stably and continuously, the evaporative gas must be continuously pumped by the refrigerating compressor to maintain a certain evaporation pressure.
Thermal expansion valve: the thermal expansion valve is both the regulating valve of the flow and the throttle valve in the refrigeration equipment. It is installed between the drying filter and the evaporator in the refrigeration equipment, and its temperature sensing package is wrapped in the outlet of the evaporator. Its main function is to make the refrigerant liquid at high pressure at normal temperature to depressurize through the current flow through the thermal expansion valve, and turn into the wet vapor of the low temperature and low pressure refrigerant (mostly liquid, small part of the steam) into the evaporator, and the vaporization and absorption of the heat in the evaporator to the purpose of cooling and cooling.
Refrigerants: most industrial chillers used in modern industry use R22 or R12 as refrigerants. Refrigerant is a refrigerant in the refrigerant system, its main role is to carry heat, and in the state of change to achieve endothermic and exothermic.





