The air-cooled chillers can be used in small systems, and most of the large ones are water-cooled. The initial water cooling investment is less than the air cooling. But with the cooling tower and the machine room, the electronic water treatment instrument, and so on, there are few places to go. Besides, for the long run, the cooling efficiency of the water cooled unit will fall relatively and the air cooling will not.
Air cooling water chiller adopts air cooling method, which saves the cooling tower, cooling water pump and pipe system necessary for the cooling water system. It avoids the fouling of the condenser, the clogging of the water pipe, and the water resources. It is the most economical and simple maintenance of the cold water air conditioning equipment.
The air cooling water chiller is a little higher than the water cold water chiller, but the operation cost of the whole year is lower than that of the water cooled chiller. The building cost of the machine room is the least in the cold and heat source system of all kinds of air conditioners, and the maintenance and maintenance cost is about half the cost of the water cooling type or the boiler.
The noise and volume of air-cooled chillers are larger than those of water-cooled ones. They can only be installed outside. Most of the water cooled units are installed in the underground chamber.
The characteristics of the air cooling type cold water machine:
1. Compressor units are equipped with scroll type full closed compressor and electronic control element, equipped with condenser and evaporator made of high efficiency and high quality copper tube.
2, equipped with all kinds of safety protection devices, stable performance, low noise, long service life, simple operation; using liquid crystal display interface, simple and convenient operation, operation condition at a glance;
3, the type of single compressor or multi compressor combined refrigeration system is adopted. The compressor can change automatically according to the load, balance the operation time of each compressor, save energy and prolong the effect of the time limit of the chiller. It is easy to adjust energy and save energy when part load.
4. The box type structure of the whole outer shell has beautiful appearance and compact structure. It can check the operation of the unit at any time; the unit can carry the water tank and circulating water pump according to the cooling capacity, without the cooling tower and the cooling water pump, the installation and maintenance are simple and convenient.





