1. When the automatic sampler and the thermostatic automatic sampler are energized, the cable between the two parts cannot be disconnected or reconnected. This will break the circuit of the module.
2. Unplug the power cord plug from the automatic sampler and the thermostat to disconnect the automatic sampler from the line power supply. But even if the power switch on the front panel of the automatic sampler is turned off, the automatic sampler is still live. Make sure you can unplug the power plug at any time.
3. If the equipment is connected beyond the specified line voltage, it will cause electric shock hazard or instrument damage.
4. Make sure the condensate pipe is always above the liquid level of the container. If the condensate pipe extends into the liquid, the condensate cannot flow out of the pipe and plug the outlet. This will damage the circuit of the instrument





