Jun 01, 2018 Leave a message

Water Pump Classification?

First of all, the categories are divided according to the working principle:

1. Vane pump

Vane pump can be divided into: centrifugal pump, mixed flow pump, axial flow pump, vortex pump.

Centrifugal pump can be divided into a single stage pump, multi - stage pump.

The single-stage pump can be divided into: single suction pump, double suction pump, self-priming pump, non-self-priming pump, etc.

Multistage pump can be divided into: section type, vortex shell type.

The mixed flow pump can be divided into vortex shell type and guide vane type.

Axial flow pump can be divided into fixed blade and adjustable blade.

Vortex pump can also be divided into single suction pump, double suction pump, self - suction pump, non - self - suction pump.

2. Volumetric pump

Volume pump can be divided into reciprocating pump, rotor pump.

The volumetric pump relies on the working element to reciprocate or rotate in the pump cylinder, making the working volume increase and decrease alternately, so as to realize the suction and discharge of the liquid. The volumetric pump that the working element makes reciprocating motion is called reciprocating pump, and the one that makes rotary motion is called rotary pump. The suction and discharge processes of the former are carried out alternately in the same pump cylinder and controlled by the suction valve and the discharge valve. The latter is driven from the suction side to the discharge side by the rotation of working elements such as gears, screws, lobed rotors or slides.

Volume pump in a certain speed or reciprocating times under a certain flow rate is a certain, almost does not change with the pressure; The flow and pressure of the reciprocating pump fluctuate greatly, and corresponding measures should be taken to reduce the fluctuation. Rotary pumps generally have no pulse or only small pulse; With self-priming ability, the pump can remove the air inhalation liquid in the pipeline immediately after starting; When starting the pump, the discharge line valve must be fully opened. Reciprocating pump is suitable for high pressure and small flow. Rotary pump is suitable for medium and small flow and high pressure. Reciprocating pump suitable for conveying clean liquid or gas mixture. Generally speaking, the efficiency of volume pump is higher than that of power pump.

3. Jet pump

It is a high-speed jet which is produced by the working fluid and then increases the energy of the fluid through momentum exchange.

Power pump by the fast rotating impeller on the liquid force, pass mechanical energy to the liquid, make its kinetic energy and pressure can increase, and then through the pump cylinder, will be carrying can and do most of the kinetic energy is converted to pressure. Power pump is also known as impeller pump or blade pump. Centrifugal pump is the most common power pump.

The lift produced by the power pump at a certain speed has a limited value, and the lift is changed with the flow. Stable operation, continuous transmission, no pulsation of flow and pressure; Generally, there is no self-priming capacity, and the pump needs to be filled with liquid or vacuum the pipeline before starting to work. Wide range of applicable performance; Suitable for conveying clean liquid with low viscosity. Specially designed pumps can transport mud, sewage, etc., or water solids. Power pumps are mainly used for water supply, drainage, irrigation, flow liquid transport, power station storage, hydraulic transmission and ship jet propulsion.

4. Other types of pumps

Besides working principle, pump can also be classified and named according to other methods. For example, the driving method can be divided into electric pump, steam turbine pump, diesel engine pump and water wheel pump. According to the structure, it can be divided into single-stage pump and multi-stage pump. It can be divided into boiler feedwater pump and metering pump by use. According to the nature of the transport liquid can be divided into pumps, pumps and mud pumps.

The pump can also be divided into:

1) the vertical pump

2) the horizontal pump

According to the number of suction outlets:

(1) single suction pump single suction pump)

(2)) double suction pump double suction pump)

According to the original motor of the driving pump:

1. Electric pump

2. Steam turbine pump

3. Diesel engine pump

4. Hydraulic vane pump

Send Inquiry

whatsapp

skype

E-mail

Inquiry