Pump: a machine that changes the pressure or flow of fluid in a volume; The membrane protein with atpase activity. The energy produced by hydrolysis ATP can be used to transport the ions or small molecules against electrochemical gradient.
Main purpose of the pump.
The pump is mainly used for conveying liquids including water, oil, acid lye, emulsion, suspension emulsion and liquid metal, etc., also can transport liquid, gas mixture and liquid containing suspended solids.
The classification of the pump
According to work principle cent.
1. The volumetric pump depends on the movement of the working part, which causes the working volume to increase and decrease periodically, and the fluid is sucked up and the pressure of the liquid can be increased directly by the extrusion of working parts. According to the different moving parts of the moving parts, there are two types: reciprocating pump and rotary pump. According to the different structure of moving parts: piston pump and plunger pump, have gear pump, screw pump, vane pump and water ring pump. 2. Impeller type pump impeller pump is driven by the impeller to drive the liquid high-speed rotation and transfer the mechanical energy to the transported liquid. According to the structural characteristics of pump impeller and the flow of different impeller type can be divided into: 1) the centrifugal pump (centrifugal pump) 2) axial flow pump, axial pump) 3) mixed flow pump (mixed flow pump) 4) vortex pump (peripheral pump) 3. The jet pump, jet pump) is produced by the working fluid of high speed jet ejector fluid, and then by the momentum exchange and make cited at the energy of the fluid increased.
Other types of pumps.
Can also according to the pump shaft position is divided into: 1) the vertical pump (vertical pump) 2) horizontal pump (horizontal pump) according to the number of suction is divided into: 1) single suction pump (single suction pump)
2) double suction pump (double suction pump) according to drive pump prime mover points: 1) the electric pump (motor pump) 2) steam turbine pump (gas turbine pump) 3) diesel engine pump, diesel pump) 4) pneumatic diaphragm pump, diaphragm pump)
Other detailed development
And water pump
The improvement of water is very important to human life and production. Ancient times has had a variety of water appliances, such as Egypt's chain pump (17th century BC), China's shadoof (17th century BC), jigger (11th century BC) and the water wheel (the 1st century AD). In the third century b.c., the spiral rod invented by Archimedes was able to continuously lift water up to a few meters, and its principle was still used by modern screw pumps. Around 200 BC, the ancient Greek craftsmen invented by Kurt west than uz fire pump is one of the most primitive piston pump, has typical piston pump's main components, but the piston pump only after the steam engine got rapid development. In 1840-1850, worthington invented the piston pump, which ACTS as a direct action of the pump cylinder and steam cylinder, which marks the formation of the modern piston pump. In 1851-1875, the multi-stage centrifugal pump with guide vane was invented, which made it possible to develop high lift centrifugal pump. The 19th century was the height of the development of the piston pump, which was used in various machines such as hydraulic presses. However, with the increase of water demand, from the 1920s, the piston pumps with low speed and heavy traffic were gradually replaced by high-speed centrifugal pumps and rotary pumps. But in the high pressure small flow field reciprocating pump still occupies the main position, especially the diaphragm pump, plunger pump has the advantage, the application is increasing day by day.
Rotary pump
The emergence of rotary pump is related to the increasing demand for liquid transportation in industry. As early as in 1588 had about four blade vane pump, later emerged in succession various rotary pump, but it was not until the 19th century rotary pump there are still large leakage, wear and low efficiency of disadvantage. At the beginning of the 20th century, people can solve the problem of rotor lubrication and sealing, and use high speed motor drive, suitable for high pressure, small flow and all kinds of viscous liquid rotary pump got rapid development. The type of rotary pump and the type of liquid suitable for conveying are not as good as other kinds of pumps.
May 24, 2018
Leave a message
There Are Several Kinds Of Pump
Send Inquiry





