Magnetic Coupler Is Compared With Frequency Converter

Compared with the frequency converter, the magnetic coupler has unique advantages, higher stability and comparability than the frequency converter, and is particularly prominent in the case of high power. Under load, it is required to operate at high speed and the power is greater than 50KW. The adaptability and maintenance-free performance in the bad working environment are not available in the frequency converter. Compared with the frequency converter, it can eliminate the harmonic interference of the motor and improve the working efficiency of the motor. In voltage reduction, the converter may not work, but the equipment is not affected; When the speed is low, the frequency converter can reduce the speed of the motor and at the same time reduce the efficiency of the cooling fan, which may cause the motor to overheat. Because of the problem of harmonic interference, the device has no such problem. Compared with frequency converter, the vibration transmission between motor and load can be eliminated. Compared with frequency converter, the maintenance cost is low. Compared with frequency converter, it can effectively extend the life of main parts of transmission system (such as bearing, seal, etc.). Allow maximum axial alignment of 5mm. Frequency converter to the environment temperature has a tough (operating temperature must be between 10 ° - 40 °, the highest temperature of 50 ° if more than 40 ° will work is not stable)