CE&ROHS Oil Temprature Machine For Food Pocessing

CE&ROHS Oil Temprature Machine For Food Pocessing

Specifications: Reasons for the oil temperature machine water pump overload alarm 1. The current connected to the pump is unstable and exceeds the safety value set by the overload relay; 2.3 Phase voltage is unstable; 3. Poor heat dissipation of the motor causes overload; 4. The inlet and outlet...
Send Inquiry
Product Introduction

 

 

Specifications:

 

ITEM UNIT KEOT-40
Temp control range ℃ Inter water temperature +25℃-300℃
Temp control accuracy ℃ PID±1℃
Power supply   AC3∮380V(3phase+Earth)
Heat transfer medium   Thermo conductive oil
Cooling method   Indirect cooling
Expansion tank capacity L 55
Heating capacity KW 36/50
Pump power KW 3.0
Pump flow M3/h 12.5
Pump pressure Kg/cm3 3.0
Maximum power consumption KW 53
Alarm function   Pump reversal/Oil shortage/Overheating/Overload/Oil overflow
Cooling water pipe inch 1/2
Circulating water pipe inch 1-1/4
Size(L×W×H) mm 1570×550×1200

Remark:1. Tank volume in bracket is on behalf of external fuel tank volume

2. The pump pressure value in bracket matches the above pump flow in bracket

Reasons for the oil temperature machine water pump overload alarm

1. The current connected to the pump is unstable and exceeds the safety value set by the overload relay;

2.3 Phase voltage is unstable;

3. Poor heat dissipation of the motor causes overload;

4. The inlet and outlet pipes are blocked during the circulation process, causing the motor to overload.

How to investigate?

1. Check the power supply voltage first. There are many reasons for the unstable voltage. If the three-phase power supply is unstable, you can install a voltage stabilizer.

2. Check whether there is any impediment in the inlet and outlet pipes of the oil temperature machine. Need to check the inlet filter valve, this position is easier to accumulate dirty dirt, it is recommended to clean it regularly. In addition, the general oil temperature controller is equipped with an internal circulation device called B-PASS. This device will also prevent the high pressure overload of the pump when the external pipeline is blocked.

3. The overload relay used for pump protection will be adjusted to a reasonable protection value before leaving the factory. If frequent overload alarms can check if there is any problem with this value, it is recommended to refer to the product manual or contact professional after-sales personnel. The value cannot be adjusted separately.

4. Check whether the air outlet of the motor pump of the oil temperature machine has good heat dissipation. If the motor is overheated, it will easily cause overload. The oil temperature controller needs to be installed in a relatively ventilated environment. Keep a certain distance between the front, back and the left.

Hot Tags: CE&ROHS Oil Temprature Machine For Food Pocessing, China, factory, suppliers, manufacturers, customized, price, made in China, heat transfer oil system, Oil Temperature Control Units, Oil Temperature Heater, simple temperature controller, temperature control equipment, temperature controller heater

Send Inquiry

whatsapp

skype

E-mail

Inquiry