The industrial chiller is divided into: water-cooled chiller, air-cooled chiller, screw water-cooled chiller, and spiral water chiller.
The cold water machine is widely used in various industries, so there are countless names. Several common names are: cold water machine, ice water machine, freezing water machine, cooling machine, refrigerator. Let's talk about their differences and characteristics:
The principle is a multifunctional machine that removes liquid vapor through a compression or heat absorption refrigeration cycle. Vapour compression chiller consists of four main components of vapor compression refrigeration cycle of compressors, steam for industrial air cooled and water cooled chillers points, is mainly refers to the condenser of the condensation in a different way.
Water-cooled industrial chillers need to set up water towers, using water tower to heat the water.
Air-cooled industrial chillers are generally integrated with evaporators, compressors and condensers. For the slightly larger power of air-cooled industrial generator, condenser, part of the measurement device in the form of a different refrigerant. The absorption chiller USES water as a refrigerant and depends on the water and lithium bromide solution to achieve a strong cooling effect. The cold water circulation system of the compressor unit can set the temperature of the three-roll machine.
The chiller can be divided into water cooling and air cooling in the form of refrigeration. In technology, water cooling is more than 300 to 500 kcal/h higher than air cooling energy efficiency. In price, water is much colder than air. On the installation, water should be included in the cooling tower for use, air cooling is removable, without other auxiliary, but air-cooled chiller with fan cooling, only to environmental requirements: such as ventilation, humidity, temperature is not above 40 ° C, air ph and so on.
