Oct 22, 2021 Leave a message

How can vacuum freeze dryer save energy

Energy saving of vacuum freeze dryer is a topic that everyone pays more attention to now. When we are using some equipment, we hope to have some methods to make its energy-saving effect better.

A flexible seal is equipped on the feeding and discharging device of the vacuum freeze dryer to better solve the smoke and dust overflow in the cylinder and play a good sealing role. The covers at both ends are highly sealed, which is energy-saving and environment-friendly. The power consumption is only 30% of that of similar products, and the coal consumption is only 50%. All indexes of materials after drying are higher than the G standard. The lifting medium and high plate reading is adopted for the plate reading of the machine, and the plates from different angles are staggered, so that the materials can be fully dispersed in the cylinder and the drying efficiency is improved.

Large-scale freeze dryer, 200kg

Most vacuum freeze dryers are non-standard equipment, mainly because the materials handled by each dryer are different, and many drying conditions change with different materials, resulting in the change of dryer structure and materials. Therefore, it is necessary to clarify the specific parameters of the material to be dried, such as material state, moisture content type, processing capacity, material characteristics in the drying process, whether there is corrosivity, combustion and explosion, whether static electricity is generated, specific product requirements, heat sensitive temperature of the material, etc., so as to determine the various parameters of the dryer. Therefore, many dryers can not be mass produced. In the design process, we must pay attention to the pertinence of materials and the adaptability to working conditions.

The physical heat pipe of vacuum freeze dryer uses the physical phase change of working Huai to transfer heat. Chemical heat pipe uses the combination and decomposition of working materials to transfer heat. In the spray drying system, the indirect heating of air by heat pipe exchanger has achieved good economic benefits. Different fluids can be selected for the working fluid of the heat pipe, but each working fluid has its appropriate working temperature range.

Steam heat exchanger is an indirect heat exchange equipment, which is composed of multiple heat dissipation tubes. During heat exchange, one group can work as required, or multiple groups can be used in series. The exhaust pipe is made of red copper or steel. In order to increase the heat transfer effect, the pipe jacket is wrapped around the fin, and the fin pipe has good contact. When steam is used as the heat medium, the pipe is filled with steam, and air flows between the fins at the pipe.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry