Plastic TCU Water Mold Temperature Control Unit
If the plastic tcu water mold temperature control unit caters to your requirement, welcome to buy the precise equipment made in China from our factory. We are one of the professional manufacturers and suppliers in China who can offer you unmatched services and prices. And the customized service is also available. Don''t hesitate any more.
-
Model NO.: KWH series
-
Temperature Regulators: Water Heater
-
Heat Pump: Resin Temperature Control
-
Specification: CE, ISO
-
Plastic Machinery: Mould Temperature Controllers
-
Electric Water Heater: Temperature Controller
-
Trademark: KASSEL
-
Origin: Zhejiang, China
1.Equipped with the design of one week automatic start/stop timer, screen can be converted between Chinese and English.
2.P.I.D.Multi-stage temperature control system can maintain a mold temperature with an accuracy of ±1℃.
3.Adopts high efficiency water cycle pump, which can meet the demands of temperature control for precise molds and mold loop with minor diameter to achieve precise temperature control and high efficiency heat exchange.Pump inside adopts stainless steel to avoid explosion.
4.Multiple safety devices including power reverse phase protection, pump overload protection, overheat protection and low level protection that can automatically detect abnormal performance and indicate this via visible alarm.
5.For KWH, the heating temperature can reach 120℃,150℃ or 180℃.
6.Equipped with high pressure protection, safety pressure relieving, automatic water supplying and air exhausting.
7.ForKWh, direct cooling is adopted, while for OMT-HTW, indirect cooling is adopted.Automatic water supplying device ensures fast heat exchange.
Application
KWH series water heaters are widely used in the production of plastic product.They are mainly applied to heat up the mold and maintain temperature, also they can be used in other similar fields.Through the principle of heat exchange, they can shorten the product mold cycle and improve production efficiency.
Functional Scheme
Water enter into mold temp.Controller through the filter, and then be heated to the required temp.Of the mold.The high temp.Water is conveyed to the mold to maintain its heat by pump, then the water returned from the mold is heated and pressured to the mold to continue the circulation, thus achieving the effect of temp.Control.
Specifications
|
ITEM |
UNIT |
KEWH-30 |
|
Temp control range |
℃ |
Inlet water temperature +15℃-150℃ |
|
Temp control accuracy |
℃ |
PID±1℃ |
|
Power supply |
AC3∮380V 50HZ 3P+E(5M) |
|
|
Heat transfer medium |
Water |
|
|
Cooling method |
Indirect Cooling |
|
|
Heating capacity |
KW |
24 |
|
Horsepower of pump |
hp |
3 |
|
Working flow of pump |
L/min |
235 |
|
System maximum pressure |
Kg/cm2 |
6 |
|
Max. power consumption |
KW |
26 |
| Cooling water pipe |
inch |
1/2 |
|
Circulating water pipe |
inch |
3/4×4 |
|
Size(L×W×H) |
mm |
1000×420×1100 |
|
Weight |
kg |
95 |
Hot Tags: plastic tcu water mold temperature control unit, China, factory, suppliers, manufacturers, customized, price, made in China
You Might Also Like
Send Inquiry