Hangzhou Kassel mechanical production of thermal oil heater (commonly known as: oil temperature machine, oil heater, also known as the industry die temperature) energy saving, safe and stable temperature control equipment, but before use to temperature control equipment A certain amount of preparation for the corresponding work, to ensure that the first use of heating equipment to normal operation. Kassel machine for you to explain the preparatory work before use:
1, in the use of HTF heater (oil temperature machine) must be emptied before heating equipment and pipe water, pipe water more difficult to clean the air gun can be used, the conditional use of hot air blowing, the water is not completely clean Debugging is difficult, there will be a certain degree of danger.
2, confirm the equipment drained clean, the injection of heat-conducting oil, heat-conducting oil injection time to be careful, do not have a one-time expansion tank full of oil, the oil level into a certain level after the equipment to open circulating pump, so with the heat Oil injection, air discharge, to continue the injection of heat transfer oil, circulation pump operation should pay attention to observe the pressure gauge, pressure gauge shows the pressure is stable, the pressure is within the allowable range, indicating that the equipment pipeline air has been basically cleared.
3, in the case of system pressure stability, the HTF heater can start heating, heating process should pay attention not to heat up too fast, to observe the pressure gauge is stable, do not continue to heat up under pressure instability, heating to the device The pressure is stable at the highest setting, and commissioning of the oil temperature machine is successful.
In short, we must be careful when using oil heaters, steps rigorous, heating safer, especially when heated to above 100 ℃ found water vapor evaporation, with particular attention to safety.
learn more
http://www.temperature-controlunit.com
http://www.kassel-temperaturecontroller.com
Related News
- Overview Of Freeze Dryers
- Die Casting Machine Of High Tempera...
- Industrial Air-cooled Chiller Princ...
- Oil Temperature Controller Applicat...
- Freeze Dryer Problems
- Composition Of Mold Temperature Mac...
- Industrial Cold Water Machine
- Characteristics Of Roller Temperatu...
- Characteristics Of Freeze Dryer
- Principle Of Mold Temperature Machine
- Plastic Injection Temperature Machi...
- What Is The Difference Between Wate...
- Flat Pressing Machine Rapid Heating...
- Water-cooled Screw Chillers Features
- Water-cooled Screw Chillers Can Hea...
- Chiller On The Performance Of The C...
- Precautions Before Using The Oil Te...
- Plastic Injection Temperature Machi...
- Oil Temperature Machine Operating A...
- Industrial Chiller Life