Hangzhou KASSEL Machinery co., ltd E-mail: kassel@kassel-group.com
Home > News > Content
How To Mold Temperatrue Controller Work
- Mar 02, 2017 -

Mold temperature machine by the water tank, heating and cooling system, power transmission system, liquid level control system and temperature sensors, sprue and other parts.Normally, the pump to make hot fluid in the power transmission system from water tank has a built-in heater and cooler to mold, then back to the tank from the mold;The temperature sensor measuring the temperature of the thermal fluid and sends the data to the control part of the controller;Controller to regulate the temperature of the thermal fluid flow, and indirectly, to regulate the temperature of the mold.If in production mold temperature machine, mould temperature more than set value of the controller, the controller will open the solenoid valve connected to feed line, until the temperature of the heat transfer fluid, namely the temperature of the mold back to the set value.If the mold temperature is lower than the set value, will open the heater controller.

learn more