Hangzhou KASSEL Machinery co., ltd E-mail: kassel@kassel-group.com
Home > News > Content
How To Choose The Oil Temperature Machine And Water Machine
- Nov 21, 2017 -

How to choose oil temperature machine and water machine?

Simple difference between oil temperature machine and water temperature machine:

Water temperature is the use of water as a heat transfer medium, the advantage of heat transfer fast, clean, easy to take with the general use of direct heating and direct cooling design. General factory mold temperature machine temperature: 120 degrees water temperature machine, 150 degrees water temperature machine and 180 degrees water machine.

Oil temperature machine is the use of a difficult to be high temperature decomposition of professional industrial oil as a heat medium, the use of direct heating and indirect cooling design principles. Generally divided into 200 degrees oil temperature machine, 300 degrees oil temperature machine and 350 degrees oil temperature machine.


Oil temperature machine works:

Oil temperature machine itself has a storage tank, the beginning of the run-time thermal oil from the storage tank into the system, the circulation pump into the mold or other equipment needs temperature control, thermal oil from the temperature control equipment is out, and then return to System, cycle again and again, the oil temperature machine comes with exhaust function, when the exhaust system in the entire system is completed, the heating system starts, the heat transfer oil continues to heat up, heat will be passed to the heating equipment or products, when the temperature probe detects the media When the temperature reaches the set value, the heater stops working. If the temperature is too high, the cooling system is started and the temperature is maintained at the set value. When the temperature is lower than the set value, the heater starts to work. When the temperature reaches the set value , And stop working, so cycle back and forth, to complete the process of the required temperature control purposes.


Water temperature machine works:

When the water temperature machine is just started, the water is introduced into the cooling circulation pipe and the air is automatically discharged. After the water in the whole system is replenished, the pressure gauge is observed. After the pointer is stable, the temperature value can be set. At this time, the heating device Start working, the temperature probe detects the temperature, did not reach the set value, the heating device has been working, when the temperature reaches the set value, the temperature probe feedback signal to the computer board, the computer board output signal to stop heating; temperature exceeds the set Value, then start the cooling solenoid valve, the introduction of some cold water to cool until the set temperature side off. Water temperature machine using a new microprocessor controller on the water temperature machine operating parameters of the implementation of fully automated monitoring and control, such as the set and the actual work Temperature, maximum operating temperature, pump operation (standard or negative pressure) mode, automatic replenishment (water mold temperature control), shutdown and forced cooling, etc. The integrated PID algorithm processor automatically calculates correct work throughout operation Parameters, and the temperature fluctuations in the control within ± 1 ℃.

Oil temperature machines and water temperature machines are used in a wide range of industries, basically the need to control the temperature field can be used, such as injection molding machines, extruders, roller temperature control, reactor jacket temperature control, mold temperature control, and many other areas , Has been called a universal equipment for the entire field of temperature control.The unit has two major functions of heating and cooling.Water temperature and water temperature machine is designed to achieve the highest performance at the lowest operating costs, accurate PID control system Reduce the heating and cooling phase of the required energy consumption, in order to optimize energy efficiency, heating control can be done in stages, warm-up start heating multiple sets, which extremely fast heating, shortening the start-up time.