Hangzhou KASSEL Machinery co., ltd E-mail: kassel@kassel-group.com
Home > News > Content
Hot And Cold Mold Temperature Machine Advantages
- Nov 18, 2017 -

Hot and cold mold temperature machine advantages

    Hot and cold mold temperature machine is also called the rapid cooling hot high light mold temperature machine, high gloss steam mold temperature machine (RHCM). It uses a high-temperature steam to make a balanced heating tunnel on the mold. When the injection molding machine blows high-temperature steam, the mold temperature is first raised to a set value (typically 130 ° -140 ° C) and then started Plastic injection to the cavity, the injection molding machine to complete the pressure into cooling, began to inject cold water, the mold temperature quickly dropped to a set value after the open mold, and then blow the air into the mold to completely blow away the cold water to complete the entire injection process. The entire injection process collectively referred to as high gloss steam injection.

So what is the advantage of rapid cooling hot mold temperature machine?

The company is located in:

1, to eliminate the surface of the product solution welding, welding marks, ripple, silver wire pattern. Improve product surface finish, so that the surface finish up to the mirror.

The company is located in:

2, thick-walled molding cycle can be reduced by more than 60%, and enhance the mobility of plastic and filling effect.

The company is located in:

3, thin wall molding to improve the mobility of injection, improve product quality and strength.

The company is located in:

4, to solve the floating phenomenon of woven products to make the quality more perfect, the product does not require spray paint processing, improve the yield of 20-30%

The company is located in:

5, small size can be used at any time with different machine, 180 degrees Celsius completely replace the boiler water is not environmentally friendly.

    6, rapid cooling speed hot mold temperature machine without connecting the boiler and other external temperature control auxiliary equipment, omitting complex boiler equipment and pipeline engineering.

The company is located in:

7, the speed of high speed hot and cold mold temperature can completely solve the plastic surface shrinkage phenomenon.

The company is located in:

8,95% of the heat recovery, as well as 100% of the media recovery, completely solve the problem of boiler non-recoverable energy consumption.

Hangzhou Kasaier Machinery Co., Ltd.