
Ordinary Silicone Oil Heating Freeze Dryer
Detailed introduction of ordinary silicone oil heating freeze dryer Ordinary silicone oil heating system freeze dryer (silicone oil heating) freeze dryer Pre-freeze drying is carried out in situ, which reduces the cumbersome operation of the drying process and realizes automation; Shelf...
Detailed introduction of ordinary silicone oil heating freeze dryer
Ordinary silicone oil heating system freeze dryer (silicone oil heating) freeze dryer
Pre-freeze drying is carried out in situ, which reduces the cumbersome operation of the drying process and realizes automation;
Shelf temperature error ≤ 1 ° C, uniform drying effect
The shelf temperature is adjustable, controllable, groping, pilot and production process;
Because the drying chamber and the cold trap are separated structures, the water-trapping ability is strong and the drying time is short;
Touch screen operation, PID control, display drying curve;
The square tray is not easy to be deformed, easy to operate and easy to clean;
The inflation valve is configured to be filled with an inert gas;
The drying chamber adopts a high light transmissive colorless transparent plexiglass door, which can clearly observe the change process of the material during the operation;
Optional eutectic point test device.
With manual and automatic working modes, you can manually explore the lyophilization curve of new materials.
Ordinary silicone oil heating system freeze dryer model | unit | Scientz-200F | |
Drying room | specification | normal type | |
Dry area | ㎡ | 2.0 | |
Shelf layer | Floor | 5+1 | |
Shelf temperature range | ℃ | -50-70 | |
Shelf temperature difference | ℃ | ±1(when balanced) | |
Shelf spacing | mm | 100 | |
Shelf size | mm | 500*900*15 | |
Ф22vials | support | 4100 | |
Ф16vials | support | 7800 | |
Ф12vials | support | 14400 | |
Water trap | Cold trap low temperature | ℃ | ≤-70 |
Water catching capacity | ㎏/24h | 25 | |
Plated liquid | L | 25 | |
Defrosting method | - | Flooded | |
Basic parameters | Ultimate vacuum | Pa | ≤10 |
Capping method | - | Hydraulic | |
cooling method | - | Air-cooled: well ventilated, room temperature ≤ 25 ° C | |
Dimensions | mm | 2100*1200*1700 |